Powerwerks PW50 PA System
|
|
|
Powerwerks PW50 PA System
The Powerwerks PW50 P.A. System combines quality performance and convenient features, all in a highly portable package. You’ll find that the PW50 works well in a variety of environments, amplifying vocals, instruments, keyboards, drum machines, audio devices, and more.
The two 4.5" speakers and high-frequency driver provide just the right combination of high and midrange sounds. This balance ensures your vocals cut through the mix while minimizing harsh and unwanted frequencies.
The PW50 construction is based on the same tried-and-true techniques as the rest of our speaker line. This includes a heavy-duty steel grill and rigid corners. This model also utilizes a high-frequency driver for crisp, accurate reproduction of treble frequency and articulate speech. For the soloist or acoustic duo, the PW50 works well when positioned on a standard speaker stand.
The Powerlink Circuit allows two or more units to be linked together and function as one P.A. system. As your following grows, so does your sound system. Multiple units can be connected to increase the sound coverage in your venue of choice.
Product Features:
- Equipped with Eminence® Speakers
- 50 Watts Output Power
- 2 MIC/Line Inputs, XLR with Phantom Power & 1/4" Line Input
- AUX IN with 1/8" Stereo Jack Summed to Mono
- POWERLINK for Ease of Input Expansion
Product Specs:
| OUTPUT POWER 1% |
50W, 8 Ohm load
|
|---|---|
| ACCEPTED INPUTS |
Ch1 and Ch2, Mic XLR Balanced, Line Level 1/4" Un-balanced
|
|
Ch 3, 1/8" Headphone/line Level Stereo, mixed mono
|
|
| FREQUENCY RESPONSE |
20Hz-20kHz, Actual response is tailored to speaker cabinet for accurate acoustical response
|
| HUM & NOISE |
-65dB, Residual Noise, all level controls 0% (minimum)
|
|
-48dB, Nominal System Noise, all level controls at 50%
|
|
| SYSTEM GAIN (MEASUREMENT MADE AT 1KHZ) |
+70dB, Mic to Speaker Output (Ch1 & Ch2)
|
|
+56dB, Line to Speaker Output (Ch1 & Ch2)
|
|
|
+42dB, Aux In to Speaker Output
|
|
| CHANNEL EQ (HIGH, LOW) |
4kHz and above, 800Hz and below
|
| POWERLINK (IN AND OUT) |
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
|
|
Recommended use: Linking two PW50 units together or adding a PW4EX mixer
|
|
| SUBWOOFER OUT |
Line Out, 20Hz-150Hz
|
| PHANTOM POWER |
+15V, Mic inputs (Ch1 & Ch2)
|
| SPEAKERS |
Two 4 1/2", 50W 4 Ohm each
|
| HORN |
3 1/2" piezo driver
|
| POWER CAPACITY |
50W RMS
|
| FREQUENCY RESPONSE |
60Hz-20kHz, Full range (subwoofer jack not used)
|
|
150Hz-20kHz, Crossover Active (1/4"mono plug in subwoofer jack)
|
|
| NOMINAL IMPEDANCE |
8 Ohms, NOT designed for external speakers
|
| DIMENSIONS (W,H,D) MM |
190mm, 460mm, 165mm
|
| DIMENSIONS (W,H,D) INCHES |
7 1/2", 18", 6 1/2"
|
| WEIGHT KG |
6.7 kg
|
| WEIGHT LBS |
14.7 lbs
|