Peavey KB-100 3-Channel 100-Watt 1x15" Keyboard Amplification System USED
This item JUST arrived at the shop so this listing might be missing photos or complete descriptions.
Give us a call or come in to check it out for yourself!
Peavey KB-100 3-Channel 100-Watt 1x15" Keyboard Amplification System USED
Our Notes:Notes
Elevate your sound with the Peavey KB-100 3-Channel 100-Watt Keyboard Amplification System, a powerful and versatile solution for musicians and performers. Featuring a robust 15" speaker, this used amplifier delivers rich, full-bodied sound, making it ideal for both practice sessions and live performances. With three channels, you can easily connect multiple instruments or devices, allowing for seamless transitions between sounds. Its durable construction ensures reliability, while the intuitive controls provide easy access to tone shaping and effects. Experience professional-grade audio quality and take your music to the next level with the Peavy KB-100.
Product Specs:
| PREAMP | |
|---|---|
| CHANNEL 1 INPUTS | Low-Z Input Impedance: 3.3 K ohms Nominal Input Level: -30 dBV, 32 mV RMS Minimum Input Level: -40 dBV, 10 mV RMS High-Z Input impedance: 100 K ohms Nominal Input Level: -10 dBV, 316 mV RMS Minimum Input Level: -20 dBV, 100 mV RMS |
| CHANNEL 2 & CHANNEL 3 INPUTS | Input Impedance: 220 K ohms Nominal Input Level: -14 dBV, 200 mV RMS Minimum Input Level: -36 dBV, 16 mV RMS |
| CHANNEL 2 MUTE | Greater Than -50 dB |
| PRE EQ PATCH (STEREO JACK TIP) | Function: Low-level effects send Load Impedance: 10 K ohms or greater Nominal Output: -10 dBV, 316 mV RMS |
| PRE EQ PATCH (STEREO JACK RING) | Function: Low-level effects return Impedance: High-Z, 100 K ohms Input Level: -10 dBV, 316 mV RMS |
| PREAMP OUTPUT | Function: High-level post EQ signal send Load Impedance: 1 K ohm or greater Nominal Output: 3 dBV, 1.4 V RMS Maximum Output: 18 dBV, 8 V RMS |
| POWER AMP INPUT | Function: High-level post EQ signal return Impedance: High-Z, 22 K ohms Nominal Input: 0 dBV, 1V RMS |
| HEADPHONE OUTPUT (STEREO JACK) | Load Impedance: 4 ohms or greater Nominal Output: 100 mW |
| REVERB SWITCH (1/4" PHONE JACK) | Function: Reverb defeat foot switch |
| CHANNEL 2 MUTE | Function: Channel two mute foot switch Greater than -50 dB |
| FREQUENCY RESPONSE | (Channel input/preamp output at 1V RMS level) +0, -3 dB, 60 Hz to 20 kHz |
| SYSTEM DISTORTION | (Channel in/preamp out, 60 Hz to 20 kHz at 1V RMS) Less than 0.05% THD, typically below 0.01% |
| CHANNEL EQUALIZATION | 15 dB at 80 Hz and 10 kHz, shelving 12 dB at 400 Hz and 2 kHz, peak/notch |
| POWER AMPLIFIER | |
|---|---|
| RATED POWER LOAD | 64 W RMS into 8 ohms with DDT compression |
| POWER AT CLIPPING (TYPICALLY) | (1 kHz, 120 V AC line) 65 W RMS into 8 ohms at 1% THD 70 W RMS into 8 ohms at 5% THD |
| FREQUENCY RESPONSE | +0,-1 dB, 20 Hz to 20 kHz, at 50 W RMS into 8 ohms |
| TOTAL HARMONIC DISTORTION | Less than 0.2%, 50 mW to 50 W RMS, 20 Hz to 10 kHz, 8 ohms, typically below 0.1% |
| DDT DYNAMIC RANGE | Greater than 20 d? |
| DDT MAXIMUM THD | Below 0.5% THD for 6 dB overload Below 1% THD for 20 dB overload |
| HUM NOISE | Greater than 90 dB below rated power |
| POWER CONSUMPTION | 200 W at 120 V AC, 50/60 Hz, Domestic 200 W at 220-230/240 V AC, 60 Hz, Export |
| DIMENSIONS WEIGHT | 25.25" H x 21" W x 12.125" D 57.10 lbs. |